DECLARATION OF CONFORMITY
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
and people.
For transmitters rated at a maximum output power not listed above , the
recommended separation distance d in meters (m) can be estimated using
theequation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) accordable to
the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz. the separation distance for the higher
frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
and people.
Mobi Technologies, Inc. declares that the (Mobi DualScan Ultra) complies
with the following normative documents: IEC60601-1, IEC60601-1-2,
IEC60601-1-4, ASTM E1965-98, IS010993-5, I5010IS010993-1010993-1,
ISO 14971, EN 124705.
To Next Page
Loading...
