MOBIUSTRIMMER.COM
MOBIUS PART RECOMMENDED PH
RANGE OF CLEANER
RECOMMENDED
CLEANER(S)
RECOMMENDED CLEANING PROCEDURE
TUMBLER
BRUSH
10 – 13 STEP 1 - CLEAN
- Super Clean,
- Tub O’ Towels Heavy Duty
Cleaning Wipes and/or
- RESIN8 XTRA
STEP 2 - RINSE
with water
STEP 3 - SANITIZE, IF
NECESSARY
- Shyield or Isopropyl
AUTOMATIC TUMBLER AND BRUSH WASHER: Add 1 part
cleaner to 4 parts hot water, turn on, allow tumbler
and brush to rotate for 5-10mins. Rinse with water.
Apply sanitizer.
MANUAL CLEANING: Soak in diluted cleaning solution
for 5 – 15 minutes, brush/wipe down any areas with
signicant resin build-up then rinse. Pressure washer OK.
TRIM TOTE
TRIM TOTE GASKET
10 – 13 STEP 1 - CLEAN
- Super Clean,
- Tub O’ Towels Heavy Duty
Cleaning Wipes and/or
- RESIN8 XTRA
STEP 2 - RINSE
with water
STEP 3 - SANITIZE, IF
NECESSARY
- Shyield or Isopropyl
Spray with or soak in diluted cleaning solution for 5 – 15
minutes, brush/wipe down any areas with signicant
resin build-up then rinse. Pressure washer OK.
IMPELLER FAN 10 – 13 STEP 1 - CLEAN
- Super Clean,
- Tub O’ Towels Heavy Duty
Cleaning Wipes and/or
- RESIN8 XTRA
STEP 2 - RINSE
with water
STEP 3 - SANITIZE, IF
NECESSARY
- Shyield or Isopropyl
Wipe down impeller blades with a cleaning wipe or
cloth, then rinse.