Mobotix M12 - Installing the MOBOTIX SecureFlex Pole Mount

2.15 Installing the MOBOTIX SecureFlex Pole Mount
If you are intending to mount the camera on a pole,
you should consider using the MOBOTIX SecureFlex
Pole Mount. This mount is made of 3mm powder-
coated stainless steel (white) and has been desig-
ned specifically for outdoor use. The supplied stain-
less steel straps allow fixing the mount to poles with
diameters between 60 and 180mm (2.4" to 7.1").
By design, the Pole Mount does
not allow using a wall
outlet for the camera cabling.
2.15.1 Delivered Parts of the SecureFlex Pole Mount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
48/92
M12 Camera Manual Part 1
Robust and maintenance-
free: Pole mount made of
3mm stainless steel
Item Count Part Name
11
12
4
8
Stainless steel screws M6x40 mm
Stainless steel washers Ø 6.4 mm
13
14
15
4
4
Stainless steel screws M6x25 mm
Stainless steel hex nuts M6
2 Stainless steel straps
2 stainless steel straps
(item15)
4 screws M6x40mm (item11)
4 washers (item12)
4 hex nuts M6mm
(item14)
4 screws M6x25mm
(item13)
4 washers Ø6.4mm
(item12)