| 17 |
Note!
．
No batteries are needed when operating with an AC/DC adapter.
．
Please unload the batteries when operating with an AC/DC adapter for an extended
period of time.
．
Leaving the batteries in the compartment for a long time may cause leakage, which
may lead to damage of the unit.
．
Recommend Adapter specification, do not use otherwise:
Model: SINPRO, HPU15-102
Rating:
Input: 100 ~ 240V, AC, 47 ~ 63 Hz, 0.4 ~ 0.2 A
Output: 6V, DC, 1A,
Note!
When you use the blood pressure monitor with AC/DC adapter, do not position the
device to make it difficult to disconnect the adapter plug.
APPLYING THE CUFF
●
Wrap the cuff on a bare arm or over thin clothing. Thick clothing
or a rolled up sleeve will cause inaccurate blood pressure
measurements.
●
Press your brachial artery approximately 2 ~ 3 cm (approx.1 inch)
above the elbow on the inside of your left arm to determine where
your strongest pulse is.
●
Slide the end of arm cuff furthest from the tube through the metal
ring to a loop. The smooth cloth should be on the inside of the cuff.
●
If the cuff is located correctly, the velcro will be on the outside of
the cuff and metal ring will not touch your skin.
USING THE AC/DC ADAPTER
This monitor is designed for operation with batteries or an AC/DC
adapter.
Please use only a compatible AC/DC adapter with required voltage
and current as indicated in this manual.
To Next Page
Loading...
