| 22 |
2. With the cuff wrapped around your upper arm, press button
to start measurement. All display units appear on the screen.
3. After all symbols disappear, the display will show “00”. The
monitor is “Ready to Measure” and will automatically inflate to
the level that is right for you.
4. As the cuff inflates, the monitor Automatically determines your
ideal inflation level. This monitor detects your blood pressure
and pulse rate during inflation. The Heartbeat Symbol ( ) flashes
at every heartbeat. Remain still and do not move until the entire
measurement process is completed. The device will detect your
pulse and determine the blood pressure.
Note!
Do not inflate the cuff until it is wrapped around your upper arm.
To Next Page
Loading...
