Mocka Amalfi Cot - Step 2: Attach Mattress Base

1
Find one of the side panels and attach to both end panels of the cot
using 6x long screws (B) and bolt nuts (C) in the holes as shown.
B
B
B
B
B
B
C
B
x6
2
Flip the cot upside down. Attach the cot mattress base at the required
level using 4x screws (A) fastened from inside the base, and tightened
using the allen key (D). Place 4x small screws (E) into the spare holes
on both end panels as shown.
x4
A
D
A
A
A
E
E
E
Mocka Amal Cot
3
mocka.co.nz | mocka.com.au
Assembly Instructions