Mocka Boston Cot - Page 4

5
6
Boston Cot
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
All done! Regularly check all screws are suitably tightened. Place the
correct size mattress into the cot before use. To clean use a damp
cloth, avoiding the use of detergents or abrasives. Once assembled lift
furniture into place, do not drag.
To adjust the base setting, remove the C screws from the end panels
and repeat steps 2 and 3 by removing the side panel and moving the
base to the corresponding hole. Securely attach again in the adjusted
position.
B
B
B
B