12 x2
8
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x nuts (D) into panel [10]. Attach 1 x knob (M) to panel [10] and
secure with 1 x screw (N). Attach panel [10] to assembled frame and
secure with 4 x 50” bolt (C). Tighten with an Allen Key (F) and a
screwdriver.
Slide draws into position as shown. Once assembled lift furniture into
place, do not drag. You’re done, enjoy!
Hobart Storage Cot
13
10
Cx2
Cx2
Dx2
N
M
Dx2
C
F
To Next Page