4
ATTENTION:
Before starting your Mockmill LINO 100 / 200 for the first time, you‘ll
need to remove the transport lock. To find out how, check page 11.
Getting started – Please follow in order
1. Connect the plug to the power socket
2. Place a bowl beneath the chute
3. Switch on the mill
4. Select milling grade
5. Empty a handful of grains into the hopper
6. Let the mill complete the milling
7. Switch the unit off
8. Discard the resulting flour, as this first milling removes any
mineral particles left over from the manufacturing process.
QUICK GUIDE
To Next Page
Loading...
