Overview shot of the pedalboard builder in the web interface
Accessing via USB cable
The easiest way to access the GUI is through the USB cable. Simply connect the USB cable, which
you received along with your MOD Duo, to your PC or Mac. The operating system should recognize
the MOD Duo as a network device and configure it automatically. However, this process may fail in
certain Windows versions, if that is your case please check the troubleshooting page
After successfully connecting the MOD Duo to your PC or Mac, open your favorite browser and
navigate to http://modduo.local (or http://192.168.51.1).
Accessing via Bluetooth
It is also possible to connect to your computer using a wireless Bluetooth connection. Check this
page to see how to do this!
Getting Device Information
This section serves to give you information about the services running, the versions of the different
pieces of software running on your MOD Duo, as well as the serial number attached to your MOD
Duo.
Press and hold the left knob for one second to open the SETTINGS menu, turn the knob to select
the Info option and short press the knob to access the Info menu.
Enter the "Services" sub-menu to see the activated services:
jack
■
mod-host
■
mod-ui
■
To Next Page
Loading...