Hot Dawg
®
Troubleshooting Guide6
Thermostat Connections
Listed below are typical residential thermostat connections to the Hot Dawg
®
control board. Consult thermostat manufacturer’s instructions for more details.
• T-stat terminal R (required) - Connects to board terminal
R for a 24 VAC source
• T-stat terminal W (required) - Connects to board terminal W to call for heat
• T-stat terminal G (optional) - Connects to board terminal G to call for fan
• T-stat terminal C (optional) - Required for some digital t-stats
Connects to board terminal C for a ground/neutral
To Next Page
Loading...
