modway EEI-1525 - Assembly Steps; Step 1: Assemble Base and Cylinder; Step 3: Attach Backrest to Column

EEI-1525 OFFICE CHAIR
Customer Service 908-368-1025︱www.modway.com
Page 2 of 3
STEP 1:
1. Please put Base (1) on a carpeted or padded surface.
2. Insert 5 pieces of Castors (3) into the Base (1) as shown by hand in Figure 1.
3. Carefully turn over the assembled Base (1) and Insert the Cylinder Column (2) as shown in Figure 2.
STEP 3:
Insert Back with Control Mechanism (4) into the Cylinder Column (2) as shown