modway Ripple EEI-1532 User Manual

EEI-1532/ EEI-1533 OFFICE CHAIR
Customer Service 908-368-1025︱www.modway.com
Page 1 of 3
Thank you for purchasing the MODWAY OFFCIE CHAIR.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Components:
1. Base x1 2. Cylinder Column x1
3. Castor x5 4. Back with Control Mechanism x1
EEI-1532 EEI-1533

modway Ripple EEI-1532 Specifications

General

Category	Indoor Furnishing
Upholstery Material	Fabric
Frame Material	Wood
Leg Material	Wood
Assembly Required	No
Product Name	Ripple
Product Type	Armchair
Style	Modern

Summary

Office Chair Components

Base

The foundational part of the office chair, designed to support the weight and allow movement.

Cylinder Column

The pneumatic cylinder that connects the chair base to the seat, enabling height adjustment.

Castor

Wheels designed to attach to the chair base, facilitating easy mobility across surfaces.

Back with Control Mechanism

The chair backrest integrated with the control mechanism for tilt and height adjustment.

Step 1: Base and Cylinder Assembly

Attaching Castors to Base

Insert five castors into the chair base by hand while the base is upside down.

Inserting Cylinder Column

Place the assembled base upright and insert the cylinder column into the center.

Step 2: Attaching Seat and Back

Connecting Seat to Cylinder

Insert the chair's back with control mechanism into the cylinder column.

Step 3: Final Assembly and Usage

Assembly Completion

The office chair is now fully assembled and ready for use.

Height Adjustment Caution

Move legs away from the base when lowering the chair height using the handle.