modway EEI-3091 User Manual

EEI–3091/3092 LOVESEAT /SOFA
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 1 of 4
Thank you for purchasing the MODWAY LOVESEAT/SOFA！
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the sofa, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 40 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6. Please keep all fitting out of reach of children.
Hardware:
A
Short Bolt M8x25mm x12
B
Long Bolt M8x50mm x2
C
Flat Washer M8 x14
D
Allen Wrench M5 x1
Component:
6
7
7
8
8
2
3
1
4
5
4
1
Sofa Seat
x1
2
Left Arm
x1
3
Right Arm
x1
4
Sofa Leg
x4
5
Support Leg
x1
6
Sofa Back
x1
7
Back Cushion
x2
8
Side Cushion
x2
EEI-3092
SOFA
EEI-3091
LOVESEAT
--
WITHOUT
SUPPORT
LEG

modway EEI-3091 Specifications

General

Product Type	Accent Chair
Weight Capacity	331 lbs
Category	Indoor Furnishing
Style	Modern
Assembly Required	Yes
Material	Fabric
Frame Material	Wood

Summary

Product Information and Preparation

Helpful Advice Before Assembly

Provides essential advice for a smooth assembly process, including reading instructions, needing two people, and tool usage.

Hardware and Component Identification

Lists and illustrates all necessary hardware components (bolts, washers, wrench) and furniture parts for assembly.

Assembly Steps 1 & 2: Seat and Arm Attachment

Step 1: Preparing the Sofa Seat

Place sofa seat upside down, open zipper, and locate all components and hardware for assembly.

Step 2: Attaching Arms to Seat

Turn the sofa seat upright and attach the left and right arms using the pre-installed clips.

Assembly Steps 3 & 4: Securing and Leg Attachment

Step 3: Securing Arms to Seat

Secure the attached arms to the sofa seat using long bolts, flat washers, and the Allen wrench.

Step 4: Attaching Sofa Legs

Attach the sofa legs and support leg to the bottom of the seat using short bolts and the Allen wrench.

Assembly Steps 5 & 6: Back and Cushion Placement

Step 5: Attaching Sofa Back

Place the sofa back onto the assembled seat and arms, securing it with pre-installed clips and Velcro.

Step 6: Adding Cushions

Place the back cushions and side cushions onto the completed sofa assembly.