modway EEI-3875-WHI - User Manual

Thank you for purchasing the MODWAY Vanity!
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
2.Owing to the size and weight of the vanity, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.
3.Please do not use any tools other than those provide or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.

Summary

Vanity Hardware Identification

Dowel;Wood

Identifies the Dowel/Wood hardware piece (A) for assembly.

Cambolt;Metal

Identifies the Cambolt/Metal hardware piece (B) for assembly.

Camlock;Metal

Identifies the Camlock/Metal hardware piece (C) for assembly.

Knob;Metal

Identifies the Knob/Metal hardware piece (D) for assembly.

Screw;Metal (E)

Identifies the Screw/Metal hardware piece (E) for assembly.

Screw;Metal (F)

Identifies the Screw/Metal hardware piece (F) for assembly.

Hinges;Metal

Identifies the Hinges/Metal hardware piece (G) for assembly.

Shelf pin;Metal

Identifies the Shelf pin/Metal hardware piece (H) for assembly.

Screw;Metal (I)

Identifies the Screw/Metal hardware piece (I) for assembly.

Bracket;Metal

Identifies the Bracket/Metal hardware piece (J) for assembly.

Screw;Metal (K)

Identifies the Screw/Metal hardware piece (K) for assembly.

Stopper;Plastic

Identifies the Stopper/Plastic hardware piece (L) for assembly.

Screw;Metal (M)

Identifies the Screw/Metal hardware piece (M) for assembly.

Screw;Metal (N)

Identifies the Screw/Metal hardware piece (N) for assembly.

Vanity Component Identification

Side Panel Left (1)

Identifies the Side Panel Left component (1).

Side Panel Right (2)

Identifies the Side Panel Right component (2).

Bottom Panel (3)

Identifies the Bottom Panel component (3).

Base Panel 1 (4)

Identifies the Base Panel 1 component (4).

Back Panel 1 (5)

Identifies the Back Panel 1 component (5).

Adjustable Shelf (6)

Identifies the Adjustable Shelf component (6).

Front Panel (7)

Identifies the Front Panel component (7).

Base Panel 2 (8)

Identifies the Base Panel 2 component (8).

Door Left (9)

Identifies the Door Left component (9).

Door Right (10)

Identifies the Door Right component (10).

Vertical Panel 1 (11)

Identifies the Vertical Panel 1 component (11).

Vertical Panel 2 (12)

Identifies the Vertical Panel 2 component (12).

Vertical Panel 3 (13)

Identifies the Vertical Panel 3 component (13).

Vertical Panel 4 (14)

Identifies the Vertical Panel 4 component (14).

Base Panel 3 (15)

Identifies the Base Panel 3 component (15).

Back Panel 2 (16)

Identifies the Back Panel 2 component (16).

Vanity Assembly Steps

STEP 1: Insert Wood Dowels

Carefully insert Wood Dowels (A) into designated holes on relevant parts.

STEP 2: Insert Cambolt

Use a Philips screwdriver to insert Cambolt (B) into pre-drilled holes.

STEP 3: Secure Door Stopper

Secure the Door Stopper (L) to the Bottom Panel (3) using Screw (K).

STEP 4: Shelf Panel Assembly

Assemble Shelf Panel by securing Base Panel (15) to Adjustable Shelf (6) with Screws (I).

STEP 5: Attach Door Hinges

Attach Door Hinges (G) to Doors (9, 10) using Screws (F).

STEP 6: Front Frame Assembly

Assemble Front Frame by securing Panels (7, 8) to Vertical Panels (11, 12) using Camlocks (C) and Cambolts (B).

STEP 7: Back Frame Assembly

Assemble Back Frame by securing Back Panels (5, 16) to Vertical Panels (14, 13) using Camlocks (C) and Cambolts (B).

STEP 8: Carcass Assembly Part 1

Attach Bottom Panel (3) and Base Panel (4) to Side Panel Left (1) using Camlocks (C) and Cambolts (B).

STEP 9: Carcass Assembly Part 2

Attach Side Panel Right (2) to Base Panel (4) and Bottom Panel (3) using Camlocks (C) and Cambolts (B).

STEP 10: Semi Completed Vanity

Combine Carcass Assembly with Back Frame Assembly using dowels and Cambolts (B), securing with Camlocks (C).

STEP 11: Complete Vanity Frame

Attach Front Frame Assembly to the Semi Completed Vanity structure using dowels and Cambolts (B), securing with Camlocks (C).

STEP 12: Insert Shelf Pins

Insert Shelf Pins (H) into pre-drilled holes to support the adjustable shelf.

STEP 13: Secure Adjustable Shelf

Align and secure the Shelf Panel Assembly to the shelf pins.

STEP 14: Adjust Door Hinges

Adjust door hinges for alignment using provided screws.

STEP 15: Attach Door Knobs

Attach Door Knobs (D) to Doors (9, 10) using Screws (E).

STEP 16: Secure Knobs to Front Panel

Secure Knobs (D) to the Front Panel (7) using Screws (E).

STEP 17: Attach Metal Brackets

Secure Metal Brackets (J) to the top corners of the vanity using Screws (F).

STEP 18: Wall Mounting Preparation

Prepare for wall mounting; note that screws and plugs are not provided.

STEP 19: Assembly Complete

Indicates that the vanity assembly process is finished.

STEP 20: Install Vanity Top

Apply silicone compound around the vanity base and carefully place the vanity top.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document outlines the assembly and installation process for the Modway Vanity, available in models EEI-3875-WHI/GRY and EEI-3876-WAL. This vanity is designed to provide a functional and aesthetically pleasing storage solution for bathrooms, featuring a cabinet structure with doors and an adjustable shelf, topped with a basin.

Function Description

The Modway Vanity serves as a foundational piece of bathroom furniture, offering enclosed storage space and a surface for a basin. Its primary function is to organize bathroom essentials, keeping them out of sight and maintaining a tidy environment. The cabinet features two doors that open to reveal an interior with an adjustable shelf, allowing users to customize the storage height to accommodate various items, from toiletries to cleaning supplies. The top surface is designed to securely hold a vanity basin, integrating the plumbing and providing a washing area. The overall design aims to enhance the utility and appearance of a bathroom, providing both practical storage and a stylish fixture.

Usage Features

The Modway Vanity is designed with several features to enhance its usability and adaptability in a bathroom setting.

• Adjustable Shelf: A key feature is the adjustable shelf located within the cabinet. This allows users to easily modify the internal storage configuration to suit their specific needs. Whether storing tall bottles or smaller items, the shelf can be repositioned to maximize space efficiency. This flexibility ensures that the vanity can adapt to changing storage requirements over time.
• Door Access: The vanity includes two hinged doors that provide easy access to the stored items. These doors help to conceal clutter, contributing to a clean and organized bathroom aesthetic. The hinges are designed for smooth operation and can be adjusted to ensure proper alignment and closure.
• Knob Handles: Each door is equipped with a knob handle, facilitating effortless opening and closing. These handles are securely attached, providing a comfortable grip and complementing the vanity's overall design.
• Basin Integration: The top of the vanity is specifically prepared to integrate a standard vanity basin. This design ensures a seamless fit, providing a stable and functional surface for washing. The structure is robust enough to support the weight of the basin and its contents, as well as withstand daily use.
• Wall Mounting Option: For enhanced stability and safety, the vanity includes provisions for wall mounting. This feature allows the unit to be securely fastened to the bathroom wall, preventing tipping and ensuring a stable installation, especially in households with children or pets. The wall mounting also helps to distribute the weight of the vanity and its contents, adding to its longevity.
• Durable Construction: The vanity is constructed from various panels and hardware components, designed for durability and stability. Wood dowels, cambolts, and camlocks are used to create strong joints, ensuring the cabinet remains sturdy over time. The materials chosen are intended to withstand the typical bathroom environment, including humidity fluctuations.
• Easy Assembly: The manual emphasizes a step-by-step assembly process, making it manageable for two adults to put together. The components are clearly labeled, and the instructions are detailed, aiming to simplify the setup. The estimated assembly time of 60 minutes suggests a relatively straightforward process.
• Tool Recommendations: The manual specifies the tools required for assembly, primarily a Philips screwdriver and a hammer (not included). This guidance helps users prepare for the assembly process, ensuring they have the necessary equipment on hand. The recommendation against power tools for certain steps highlights the importance of careful, controlled assembly to prevent damage.

Maintenance Features

Maintaining the Modway Vanity involves simple steps to ensure its longevity and appearance.

• Tightening Components: The manual advises that components may need to be tightened from time to time, depending on usage. This is a crucial maintenance feature, as it helps to preserve the structural integrity and stability of the vanity. Users are encouraged to save the provided tools for this purpose, making it easy to perform periodic checks and adjustments.
• Silicone Sealing for Basin: During the final installation step, a thin bead of silicone compound is applied around the vanity base before setting the vanity top. This silicone seal is vital for preventing water from seeping into the cabinet structure, which could cause damage over time. Any excess silicone should be removed with a wet rag, ensuring a clean and watertight finish. This proactive measure significantly contributes to the vanity's durability in a wet environment.
• General Cleaning: Although not explicitly detailed in the assembly instructions, the materials used for the vanity are typically designed for easy cleaning with standard household cleaners. Regular wiping down of surfaces helps to maintain its appearance and hygiene, especially in a bathroom setting where splashes and spills are common.
• Protection from Children: The instruction to keep all pieces out of reach of children during assembly is a safety feature that also contributes to maintenance by preventing accidental damage or loss of components before the unit is fully assembled.
• Packaging Retention: The advice to retain packaging and instructions until assembly is complete and all components are checked is a practical maintenance tip. It ensures that if any parts are missing or damaged, the user has all the necessary information for support, and the packaging can protect components during the assembly process.

In summary, the Modway Vanity is a practical and adaptable bathroom fixture designed for easy assembly, customizable storage, and straightforward maintenance, ensuring it remains a functional and attractive part of the bathroom for years to come.

modway EEI-3875-WHI Specifications

General

Product Type	Accent Chair
Color	White
Frame Material	Wood
Armrest Height from Seat	7" H
Style	Modern
Assembly Required	Yes
Backrest Dimensions	16" H
Product Name	EEI-3875-WHI