modway EEI-3270 User Manual

EEI-3270 ARMLESS CHAIR/EEI-3318 OTTOMAN/EEI-3319 CORNER
Customer Service 609-256-9000︱www.modway.com
Page 1 of 4
Thank you for purchasing the MODWAY CORNER/ CHAIR/ OTTOMAN
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the sofa/ chair/ottoman, we recommend that it is assembled by two adults,
on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M8x60mm x4
Flat Washer x4
1. Ottoman Body x1 2. Leg x4 3. Seat Cushion x1
x1
B.
Allen Wrench M8 x1
C.
A.
D.
Felt Pad x4
4. Back cushion x 4 （1 pc Back cushion for EEI-3270; 3 pcs Back cushions for EEI-3319）
x1

modway EEI-3270 Specifications

General

Brand	modway
Model	EEI-3270
Category	Indoor Furnishing
Language	English

Summary

Before You Start: Helpful Advice and Components

Helpful Advice

Provides essential guidance for safe and efficient assembly, including reading instructions and handling components.

Hardware List

Details all hardware components required for assembly, such as bolts, washers, and wrenches.

Components List

Identifies all furniture parts, including ottoman body, legs, and cushions for the chair and corner.

Step 1: Prepare the Ottoman Body

Placement and Unpacking

Place the ottoman body on a soft surface and unpack legs and hardware from the bottom.

Step 2: Attach Ottoman Legs

Leg Attachment and Tightening

Attach legs using bolts and washers, then tighten securely with the Allen wrench.

Apply Felt Pads

Affix felt pads to the bottom of each leg after all bolts are tightened for floor protection.

Step 3: Finalize Ottoman Assembly

Close Zipper and Turn Over

Secure the ottoman's bottom zipper and carefully turn the assembled unit upright.

Step 4: Add Cushions

Seat and Back Cushion Placement

Attach the seat cushion to the ottoman and the back cushions to the respective chair and corner units.

Step 5: Combine Furniture Components

Modular Sectional Configurations

Assemble the ottoman, armless chair, and corner into various sectional combinations.

Unlocking Combination

Instructions on how to separate the combined furniture units.