modway EEI-3484 User Manual

EEI-3484 BENCH
Customer Service 908-368-1025︱www.modway.com
Page 1 of 3
Thank you for purchasing the MODWAY BENCH.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the bench, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
Components:
1
2
Bolt M8x65mm x8
Spring Washer M8 x8
2
Flat Washer M8 x8
1. Bench Body x1 2. Leg x4
A.
B.
C.
Allen Wrench x1
D.
2
2

modway EEI-3484 Specifications

General

Product Type	Chair
Category	Indoor Furnishing
Upholstery Material	Fabric
Leg Material	Metal
Metal	Yes
Color	Black
Style	Modern
Assembly Required	Yes
Black	Yes
Product Name	Modway EEI-3484

Summary

Helpful Advice Before Assembly

Read Instructions Thoroughly

Spend time reading the leaflet and following the simple step-by-step instructions.

Assembly Environment and Team

Assemble with two adults on a carpeted area; approximate assembly time is 30 minutes.

Tool Usage and Recommendations

Use only tools provided or recommended in these instructions.

Packaging and Disposal Guidelines

Do not discard packaging until assembly is complete; dispose of safely and environmentally.

Assembly Tightening Strategy

Assemble components loosely until advised to tighten; periodically re-tighten.

Child Safety Precaution

Keep all assembly pieces out of reach of children.

Assembly Step 1: Prepare Components

Position Bench Body and Access Parts

Place bench body upside down on a carpeted surface and unzip to access legs and hardware.

Assembly Step 2: Attach Legs

Secure Legs to Bench Body

Attach legs using bolts, spring washers, and flat washers, then tighten with the Allen wrench.

Assembly Step 3: Finalize Assembly

Complete and Flip Bench

Close the zipper on the bench body and carefully turn over the assembled bench by two adults.