modway EEI-3484 - Assembly Step 1: Prepare Components; Position Bench Body and Access Parts; Assembly Step 2: Attach Legs; Secure Legs to Bench Body

EEI-3484 BENCH
Customer Service 908-368-1025︱www.modway.com
Page 2 of 3
STEP 1:
1. Please put Bench Body (1) upside down on a carpeted or padded surface.
2. Open the zipper on the bottom of the Bench Body (1) and take out the 4 pieces of Legs (2) and
hardware package.
+ Hardware package
STEP 2:
1. Attach 4 pieces of Legs (2) to the corner of Bench Body (1) by using 8 pieces of Bolts (A) with
8 pieces of Spring Washers (B) and 8 pieces of Flat Washers (C) as shown.
2. Use Allen Wrench (D) to tighten all Bolts (A) clockwise as shown.
2*4PCS