modway EEI-3874 - User Manual

To Next Page

EEI-3874-Chair

Customer Service 609-256-9000︱www.modway.com

Page

of 3

Thank you for purchasing the MODWAY Chair !

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2. Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components

and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

and environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten

the components from time to time, so please save the tools that have been provided.

6. Please keep all pieces out of reach of children.

Hardware:

Components:

Bolt M8x30mm x12

Spring Washer M8 x12

Flat Washer M8 x12

1. Chair Body x1 2. Leg x4

Allen Wrench x1

Need help?

Do you have a question about the modway EEI-3874 and is the answer not in the manual?

Summary

MODWAY Chair Assembly Guide

Pre-Assembly Instructions and Advice

Essential guidance on reading instructions, assembly environment, tools, and component handling.

Step 1: Prepare Chair Body and Unpack Components

Instructions for placing the chair body upside down and retrieving legs and hardware.

Step 2: Attach Legs to Chair Body

Detailed steps for attaching the four legs using bolts, spring washers, and flat washers.

Step 3: Final Assembly Completion

Closing the zipper on the chair bottom to finalize the assembly.

The EEI-3874-Chair is a stylish and comfortable seating solution designed for easy assembly and long-term enjoyment. This chair, manufactured by Modway, emphasizes user-friendly setup and practical maintenance, making it a suitable addition to various indoor settings.

Function Description:

The primary function of the EEI-3874-Chair is to provide comfortable seating. Its design suggests a blend of modern aesthetics with functional comfort, suitable for living rooms, bedrooms, or office spaces. The chair is designed for stationary use and is intended to be a permanent fixture in a room once assembled. The assembly process is straightforward, involving the attachment of the chair's legs to the main body, ensuring stability and readiness for use.

Important Technical Specifications:

Model Number: EEI-3874-Chair
Manufacturer: Modway
Assembly Time: Approximately 30 minutes (recommended for two adults)
Components:
- Chair Body (1 piece)
- Legs (4 pieces)
Hardware:
- Bolts M8x30mm (12 pieces) - Type A
- Spring Washers M8 (12 pieces) - Type B
- Flat Washers M8 (12 pieces) - Type C
- Allen Wrench (1 piece) - Type D
Tools Required: Allen Wrench (provided)
Recommended Assembly Personnel: Two adults
Assembly Area: Carpeted or padded surface in the intended room
Packaging: Designed to contain all components and hardware, with instructions for safe and environmentally friendly disposal.

Usage Features:

Easy Assembly: The chair is designed for a simple, step-by-step assembly process that can be completed in approximately 30 minutes. The instructions are clear and concise, guiding users through each stage.
Two-Person Assembly Recommended: Due to the size and weight of the chair, it is recommended that two adults assemble it. This ensures safety and ease during the process, particularly when handling the main chair body and attaching the legs.
Protective Assembly Surface: Users are advised to assemble the chair on a carpeted or padded surface. This precaution helps prevent damage to both the chair and the floor during assembly.
Integrated Storage for Legs and Hardware: The legs and hardware package are conveniently stored within a zippered compartment on the bottom of the chair body. This clever design ensures that all necessary parts are readily available and minimizes the risk of losing components before assembly.
Secure Leg Attachment: The legs are securely attached to the chair body using a combination of bolts, spring washers, and flat washers. This system ensures stability and durability of the chair during use. The provided Allen wrench facilitates the tightening of these fasteners.
Loose Assembly then Tightening: The instructions recommend assembling all components loosely first, then tightening them. This allows for easier alignment of parts before final securement, preventing potential misalignment or stress on the components.
Compact Packaging: The design allows for the legs and hardware to be stored within the chair body, which likely contributes to more compact packaging for shipping and storage prior to assembly.

Maintenance Features:

Retain Tools for Future Tightening: Users are advised to save the provided Allen wrench. Over time, due to regular use, it may be necessary to re-tighten the components to maintain the chair's stability. Having the tool readily available simplifies this maintenance task.
Regular Component Check: The instruction to save the tools implies a recommendation for periodic checks and tightening of the chair's fasteners to ensure its continued structural integrity and safety.
Safe Disposal of Packaging: The manual emphasizes the importance of disposing of packaging in a safe and environmentally friendly way, promoting responsible consumption and waste management.
Keep Pieces Out of Reach of Children: This is a crucial safety measure, especially during assembly, to prevent accidents or ingestion of small parts by children.

In summary, the EEI-3874-Chair by Modway is a user-friendly, aesthetically pleasing, and practical piece of furniture. Its design prioritizes ease of assembly, stability, and long-term usability, with clear instructions and provisions for ongoing maintenance.