modway EEI-3874 - Step 1: Prepare Chair Body and Unpack Components; Step 2: Attach Legs to Chair Body

EEI-3874-Chair
Customer Service 609-256-9000︱www.modway.com
Page
2
of 3
STEP 1:
1. Please put Chair Body (1) upside down on a carpeted or padded surface.
2. Open the zipper on the bottom of the Chair Body (1) and take out the 4 pieces of Legs (2) and
hardware package.
STEP 2:
1. Attach 4 pieces of
Legs
(2) to the corners of Chair Body (1) by using 12 pieces of Bolts (A) with
12 pieces of Spring Washers (B) and 12 pieces of Flat Washers (C) as shown.
2. Use Allen Wrench (D) to tighten all Bolts (A) clockwise as shown.
2 2 2 2
+ Hardware
package