modway Viola EEI-3373 User Manual

Thank you for purchasing the MODWAY SOFA!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.
2. Owing to the size and weight of the Sofa, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 25 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save tools that have been provided.
6. Please keep all fitting out of reach of children.
Hardware:
1
JCBC BOLT M6 x 70
2 PCS
2
JCBB BOLT M8 x 30 12PCS
3 JCBB BOLT M8 x 45 7 PCS
4 FLAT WASHER M6 2 PCS
5
SPRING WASHER M6
2 PCS
6
FLAT WASHER M8 19PCS
7
SPRING WASHER M8 19 PCS
8
WOOD DOWEL M10 X 30mm 6 PCS
9
ALLEN KEY (BALL SHAPE) M4
1 PC
10
ALLEN KEY (BALL SHAPE) M5
1 PC
Component:
A.
BACK
B.
SEAT
C.
ARM
D.
FRONT LEG
E.
BACK LEG
EEI - 3373 SOFA
x 1
x 1
x 2
x 2
x 2
A
B
C
C
D
E
11
WOOD SCREW M4 x 32mm
4 PCS
Page 1 of 4
Customer Service 609-256-9000
www.modway.com

modway Viola EEI-3373 Specifications

General

Category	Indoor Furnishing
Product Type	Dining Chair
Assembly Required	Yes
Material	Metal
Color	Black
Style	Modern
Type	Chair

Summary

Step 1: Attaching the Back

Fit Wood Dowel into Back

Insert wood dowel into the pre-drilled hole of the back piece.

Secure Back to Arm

Attach the back to the arm using JCBC bolt, flat washer, and spring washer.

Step 2: Attaching the Seat

Fit Wood Dowel into Seat

Insert wood dowel into the pre-drilled hole of the seat piece.

Secure Seat to Back and Arm

Attach the seat to the back and arm using JCBC bolts, flat washers, and spring washers.

Step 3: Attaching the Legs

Secure Front Legs

Attach front legs using JCBB bolts, flat washers, and spring washers.

Secure Back Legs

Attach back legs using JCBB bolts, flat washers, spring washers, and wood screws.

Step 4: Final Positioning

Position Assembled Sofa

Move the fully assembled sofa to its final location with assistance.