modway Vivify EEI-2852 User Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 4
EEI –2852
DESK
Thank you for purchasing the MODWAY DESK！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all fitting out of reach of children.
Hardware:
1
Long Bolt M6x40mm x4
2
6
Allen Wrench M4 x1
3
Component:
A
Desk Top x1
C
Leg x4
B
Top Frame x1
Medium Bolt M6x20mm x4
Short Bolt I M6x15mm x12
C
D
Side Rail x2
E
Back Rail x1
4
Short Bolt II M6x12mm x4
5
Castor x4
A
B
B
B
B
E
E
D

modway Vivify EEI-2852 Specifications

General

Category	Indoor Furnishing
Material	Fabric
Frame Material	Wood
Leg Material	Wood
Style	Modern
Assembly Required	Yes
Product Name	Vivify
Type	Armchair
Color	Black

Summary

Modway Desk Assembly Instructions

Pre-Assembly Advice

Read through leaflet and follow step-by-step instructions. Two adults recommended for assembly.

Step 1: Assemble Frame and Legs

Attach legs to the top frame using short bolts I and do not fully tighten.

Step 2: Attach Rails to Frame

Connect bottom rails, back rail, and side rails to the frame and legs using bolts.

Step 3: Install Castors

Screw the 4 castors into the bottom of the assembled legs by hand.

Step 4: Secure Desk Top

Place the desk top onto the frame and secure it using short bolts II.

Step 5: Final Positioning

Carefully turn the fully assembled desk upright.