modway EEI-2542 User Manual

Customer Service 908-368-1025︱ Page 1 of 11
EEI-2542 CABINET
Thank you for purchasing the MODWAY Cabinet!
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the cabinet, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
A
Ø 6 x 35 mm x12
F
x 4
B
Ø 15 mm x12
C
x 40
D
M 12 x 45 mmØ 8 x 30 mm x 4
E
M 12 x 35 mm x 4
K
x 4
G
x 4
H
x 8
I
x 8
J
x 4
25 x 25 x 2 mm
L
x 4
M
Ø 5 x 15 mm
x 4
N
9 x 14 x 10 mm
x 4
O
M 3.5 x 15.5 mm
x 1
Ø 8 x 19 mm
Ø 8 x 16 mm
Ø 8 mm
Ø 15 mm(Long)
Screwdriver (Not Include)
Hardware :
Ø 15 mm(Short)
Cambolt/Metal
CamLock/Metal
Dowel Big/Wood
Screw/Metal Screw/Metal
Screw/Metal
Screw Cup/Plastic Screw Cup/PlasticShelf Pin/Metal
Wedge/Plastic
Buffer/Rubber Foam Pad/Spon
Pin Sliding Top/Plastic
Pin Sliding Bottom/Plastic
www.modway.com

modway EEI-2542 Specifications

General

Brand	modway
Model	EEI-2542
Category	Indoor Furnishing
Language	English

Summary

Hardware

Hardware Components

Lists all included hardware with codes, dimensions, and quantities for cabinet assembly.

Cabinet Components

Parts List

Details all individual wooden and metal components required for the cabinet assembly.

Assembly Instructions

Step 1: Initial Panel Attachment

Connects side panels (3, 5) to top board (1) and side panels (4, 6) to top board (1) using dowels and screws.

Step 2: Attaching Main Boards

Attaches the fixed shelf (7) and bottom board (2) to the side panels using hardware.

Step 3: Connecting Side Panels

Connects side panels (4, 3) to smaller boards (5) using cam locks and bolts.

Step 4: Installing Back Panel

Attaches the large back panel (15) to the assembled cabinet structure.

Step 5: Securing Internal Boards

Secures the fixed shelf (7) and other internal boards using cam locks and bolts.

Step 6: Attaching Shelves and Supports

Attaches the fixed shelf (7) and another board (6) to the structure using hardware.

Step 7: Attaching Back Panel and Board

Attaches the large back panel (14) and a board (2) using hardware.

Step 8: Assembling Leg Structure

Assembles the leg units (11) with support boards (13, 12) using dowels and screws.

Step 9: Connecting Legs to Cabinet

Connects the assembled leg structures (11) to the main cabinet body.

Step 10: Securing Leg Structure

Continues securing the leg structures (11) to the cabinet base using hardware.

Step 11: Installing Leg Dowels

Installs dowels (C) into the leg structure components.

Step 12: Attaching Bottom Board

Attaches the bottom board (2) to the cabinet frame using hardware (E, L).

Step 13: Installing Shelf Pins

Installs shelf pins (G) into pre-drilled holes on the side panels.

Step 14: Attaching Sliding Mechanisms

Attaches sliding hardware (M, N) to the sliding doors (9, 10).

Step 15: Installing Sliding Doors

Installs the sliding doors (9, 10) onto the cabinet using the attached mechanisms.

Step 16: Final Hardware Attachment

Attaches drawer fronts or decorative elements using hardware (H, I).

Step 17: Assembly Complete

Final confirmation of assembly, indicating the cabinet is ready for use.