modway EEI-2531 User Manual

Customer Service 908-368-1025︱ Page 1 of 11
EEI-2531 SIDEBOARD
A)
Ø 6 x 35 mm x18
F)
x 16
B)
Ø 15 mm x12
C)
Ø 12 mm
x 6
D)
Ø 8 x 30 mm
x 4
E)
Ø 6 x 30 mm x 6
L 4
G)
M 6.5 x 10.5 mm
x 1
H)
M 3.5 x 13 mm
x 8
J)
M 7 x 50 mm
x 8
P)
x 16
L)
x 20
M)
Ø 5 x 15 mm
x 18
N)
9 x 14 x 10 mm
x 12
Q)
x 5
R)
x 5
S)
x 8
O)
Ø 15 mm
x 24
T)
x 1
Screwdriver (Not Include)
Hardware :
M 8 x 39 mm
M 3.5 x 15.5 mm
Thank you for purchasing the MODWAY SIDEBOARD !
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that hav
e been provided.
6.Please keep all pieces out of reach of children.
Owing to the size and weight of the Sideboard, we recommend that
Cambolt/Metal
CamLock Big/Metal
CamLock Small/Metal
Screw/Metal
Screw/Metal
Screw/Metal
M 3.5 x 15.5 mm
K)
x 24
Screw/Metal
Screw/Metal Screw/Metal
Screw/Metal
Dowel Small/Wood
Dowel Big/Wood Hex/Allen Key/Metal Shelf Pin/Metal
HN26C)
x 4
Hinge Set / Metal
350 mm
RM35A)
x 3
Drawer Runner / Metal
PM1)
x 4 70 x 62 x 17 mm
Leg Mounting Plate / Metal
Ø 18 x 29 mm
Door/Drawer Knob/Metal Chrome
Screw/Metal
M 4 x 20 mm
Screw Cap / Plastic
Wedge/Plastic
I)
x 4
Ø 8 mm
Bumper /Silicon
M 4 x 16 mm
www.modway.com

modway EEI-2531 Specifications

General

Brand	modway
Model	EEI-2531
Category	Indoor Furnishing
Language	English

Summary

Hardware Overview

Assembly Instructions

Step 1: Connecting Hardware Assembly

Connect Cambolt (A) on Top Board (1) and insert dowels.

Step 2: Securing Leg Mounting Plate

Attach Leg Mounting Plate (O) to Bottom Board (2) and flip.

Step 3: Securing Side Boards

Attach Side Boards (3), Center Boards (4, 5) to Top Board (1) using Camlock (B).

Step 4: Insert Backboards

Insert Backboards (15, 14) and secure Bottom Board (2) with Camlock (B).

Step 5: Legs Assembly

Assemble the legs (LB18A) using hardware (D, G).

Step 6: Adjustable Shelf Assembly

Assemble Adjustable Shelf (6) using Shelf Pin (H).

Step 7: Securing Hinges

Secure Hinges (HN26C) onto Doors (7, 8) using Screw (J).

Step 8: Door and Knob Attachment

Attach Doors (7, 8) with hinges and attach Door Knobs (Q) with Screw (R).

Step 9: Drawer Box Parts Assembly

Assemble drawer box parts, connecting hardware (A, E) to drawer front (9).

Step 10: Drawer Box Assembly

Secure drawer sides (10, 11) to drawer front (9) and insert drawer back (12).

Step 11: Drawer Runner and Knob

Attach drawer runner (RM35A) and knob (Q) to drawer box.

Step 12: Repeat Drawer Assembly

Repeat steps 9-11 to assemble two more drawers.

Step 13: Drawer Box Fitting

Fit assembled drawers into the sideboard body by aligning rollers.

Step 14: Securing Back Board

Secure the back board using plastic Wedge (O) with Screw (K).

Step 15: Final Assembly Check

Assembly is complete, sideboard is ready to enjoy.

Tipping Restraints Kit Installation Guidance

Installation Instructions

Steps to attach anti-tip brackets and straps to furniture and wall.