modway EEI-2547 - User Manual

Chair Back ×1
EEI-2547
Bolt M8×65mm ×8
Spring Washer M8 ×8
Flat Washer M8 ×8
Chair Seat ×1
and then follow the simple step-by-step
f reach of children.

Summary

Helpful Advice for Modway Dining Chair Assembly

Read Instructions and Prepare

Spend time reading instructions and assemble by two adults on a padded area. Use only provided tools.

Component Handling and Tightening

Do not discard packaging until assembly is complete. Assemble loosely first, then tighten components as needed.

Step 1: Attach Front Legs to Seat

Leg Attachment Procedure

Insert front legs into the chair seat and attach loosely with bolts, spring washers, and flat washers.

Step 2: Connect Chair Seat to Chair Back

Seat to Back Connection

Attach the chair seat to the chair back using bolts, spring washers, and flat washers for each corner.

Step 3: Level and Fully Tighten Chair

Leveling and Final Tightening

Turn chair over, apply pressure for leveling, and fully tighten all bolts using the Allen wrench.

Step 4: Recover Velcro

Final Assembly Check

Secure the Velcro on the bottom of the chair seat. Assembly is complete.

modway EEI-2547 Specifications

General

Brand	modway
Model	EEI-2547
Category	Indoor Furnishing
Language	English