modway Viola EEI-3373 - Step 2: Attaching the Seat; Fit Wood Dowel into Seat; Secure Seat to Back and Arm

STEP 2
10
3
7
6
10
3
7
6
EEI - 3373 SOFA
x 4
x 3
2.1 Fit the Wood Dowel (8) into the pre-drilled hole of the Seat (B) .
2.2 Insert and secure the Seat (B) to the Back (A) & Arm (C) using 7 piece of JCBC Bolt (3), 7 piece of Flat Washer (6), and 7 piece of
Spring Washer (7). Use Allen Key (10) to tighten. (Note : Finish step 2 : Please tighten bolt at step 1.2 )
3. JCBC BOLT M6 x 70 x 7pcs
7. SPRING WASHER M6 x 7pcs 6. FLAT WASHER M6 x 7pcs
10. ALLEN KEY (BALL SHAPE) M4 x 1pc
8. WOOD DOWEL M10 x 30mm X 4PCS
OR
TOOLS REQUIRED FOR ASSEMBLY
Rubber Mallet
Plastic Tip Hammer
2.1
2.2
2.3
8
B
Page 3 of 4
Customer Service 609-256-9000
www.modway.com