modway EEI-3091 - Assembly Steps 3 & 4: Securing and Leg Attachment; Step 3: Securing Arms to Seat; Step 4: Attaching Sofa Legs

EEI–3091/3092 LOVESEAT /SOFA
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 3 of 4
STEP 3:
Put the assembled Sofa Seat (1), Left Arm (2), and Right Arm (3) backside down on a carpeted or padded surface.
Insert 2 pieces of Long Bolt (B) with 2 pieces of Flat Washer (C) into the pre-drilled holes on Left Arm (2)/Right Arm (3)
through the pre-drilled holes on inner side of the bottom of Sofa Seat (1) as shown.
Use Allen Wrench (D) to tighten Long Bolts (B) clockwise until secure.
STEP 4:
Please carefully close the Zipper on the bottom of Sofa Seat (1).
Hardware & Tools required
Put the assembled Sofa Seat (1), Left Arm (2), and Right Arm (3) upside down on a carpeted or padded surface.
Place 1 piece of Sofa Leg (4) into the bottom of Sofa Seat (1) as shown.
Insert 3 pieces of Short Bolts (A) with 3 pieces of Flat Washers (C) into the pre-drilled holes on the bottom of Sofa Seat (1)
through the pre-drilled holes on the metal plate of Sofa Leg (4) as shown.
Use Allen Wrench (D) to tighten Short Bolts (A) clockwise until secure.
Repeat the same steps for the remaining 3 pieces of Sofa Leg (4).
Tighten Support Leg (5) into the middle of the bottom of Sofa Seat (4) until secure by hand.
Hardware & Tools required
Bx2
Cx2
Dx1
2
3
1
C
B D
C
B
A
C
4
2
4
A
C
D
D
A
C
4
3
4
A
C
D
D
1
5