modway EEI-2577 - Assembly Instructions; Attach Front Legs; Attach Back Legs

EEI-2577
E
B
D
E
A
B×4 C×4 D×4
A×4 C×4 D×4
STEP1:
STEP2:
LEISURE CHAIR
Legs Package
+
Hardware Package
Please open the Velcro on the bottom of to find legs package and hardware package.Chair Body(1)
Insert 1 pieces of Front Leg(2) with 2 pieces of Bolt(B),2 pieces of Spring Washer(C) and 2 pieces of
Flat Washer(D) into the bottom of Chair Body(1) as shown.
Repeat the same steps for .Front Leg(2)
Do not fully tighten Bolts(B) for either leg.
Insert 1 pieces of Back Leg(3) with 2 pieces o fBolt(A),2 pieces of Spring Washer(C) and 2 pieces
of Flat Washer(D) into the bottom of Chair Body(1) as shown.
Repeat the same steps for Back Leg(3).
Do not fully tighten Bolts(A) for either leg.
E×1
E×1