Moeller DF5 series - Type Code Description

02/02 AWB8230-1447GB
Standard form for user defined
parameter settings
7
A42 Percentage voltage increase with
manual boost
0 to 99% 11
A43 Maximum boost at x % of the base
frequency
0 to 50 % 10.0
A44 U/f characteristic • 00: Constant torque curve
• 01: Reduced torque curve
00
A45 Output voltage 50 to 100 % 100
A51 DC braking • 00: Inactive
• 01: Active
00
A52 DC braking starting frequency 0.5 to 10 Hz 0.5
A53 DC braking waiting time 0.0 to 5 s 0.0
A54 DC braking torque 0 to 100 % 0
A55 DC braking duration 0.0 to 60 s 0.0
A61 Maximum operating frequency 0.5 to 360 Hz 0.0
A62 Minimum operating frequency 0.5 to 360 Hz 0.0
A63 1st frequency jump 0.1 to 360 Hz 0.0
A64 Jump width of the 1st frequency jump 0.1 to 10 Hz 0.5
A65 2nd frequency jump 0.1 to 360 Hz 0.0
A66 Jump width of the 2nd frequency jump 0.1 to 10 Hz 0.5
A67 3rd frequency jump 0.1 to 360 Hz 0.0
A68 Jump width of the 3rd frequency jump 0.1 to 10 Hz 0.5
A71 PID control • 00: Inactive
• 01: Active
00
A72 P component of the PID control 0.2 to 50 1.0
A73 I component of the PID control 0.0 to 150 s 1.0
A74 D component of the PID control 0.0 to 100 s 0.0
A75 Setpoint factor of the PID control 0.01 to 99.99 1.00
A76 Input actual value signal for PID control • 00: Input OI
• 01: Input O
00
A81 AVR function • 00: Active
• 01: Inactive
• 02: Inactive during deceleration
02
A82 Motor voltage for AVR function • 200, 220, 230, 240 V
• 380, 400, 415, 440, 460 V
230/
400
A92 2nd acceleration time 0.1 to 3000 s 15.0
A93 2nd deceleration time 0.1 to 3000 s 15.0
A94 Changeover from 1st to 2nd time ramp • 00: Input 2CH
• 01: PNU A95 or A96
00
A95 Changeover frequency on changeover
from first to second acceleration time
0.0 to 360 Hz 0.0
A96 Changeover frequency on changeover
from first to second deceleration time
0.0 to 360 Hz 0.0
A97 Acceleration characteristic • 00: Linear
• 01: S curve
00
A98 Deceleration characteristic • 00: Linear
• 01: S curve
00
PNU Meaning Value range Def. Setpoint