Moeller IZM1 Series - 5.5 Connection of protective conductor; Protective conductor connection for fixed-mounted and withdrawable units; 5.6 Conversion of Fixed to Withdrawable Circuit-breaker

08/07 AWB1230-1407GB 5 – 21
5.5 Connection of protective conductor
5.5.1 Fixed-mounted circuit-breaker
5.5.2 Withdrawable unit
5.6 Changeover of fixed mounting circuit-breaker
into withdrawable circuit-breaker
Note
For the changeover of your circuit-breaker our Field Service can be
used.
To contact Field Service: a chapter 26.
– Switching off and discharging the storage spring
(a page 24 – 2)
– Remove fixed-mounted circuit-breaker(a page5–1)
– Remove terminals other than horizontal terminals
(a page5–7)
– Remove front panel (a page 24 – 6)
– Remove overcurrent release (a page 9 – 39)
– Install rated current coding on the new circuit-breaker feet and on
the withdrawable unit (a page 19 – 5)
o 14 mm
o 14 mm