8
Use the oven pre-heated or cold.
Set the temperature controller as required.
Set the time controller as required.
Load the food, evenly spaced into the oven to give a good airflow
throughout the oven.
Press the switch to the Regen position. Oven will now control temperature
for the set number of minutes.
At the end of the time, the ready light will illuminate and the internal buzzer
will sound. The food is now ready for testing and service.
1.4: Baking/Roasting & General Application
1.
2.
3.
4.
5.
6.
Carefully remove all packaging & plastic coatings from the
appliance. Then dispose in a responsible manner.
Check for damage. Please note that in compliance with warranty,
any defects must be reported within 3 days of delivery.
Ensure all shelves are in position.
Always ensure unit is clean before operation. For cleaning
instructions see section 3.0 on page 9.
Place the appliance in its intended location - on a flat, level surface.
1.
2.
3.
4.
5.
2: Installation
To Next Page
Loading...
