9
Do not use a water jet or pressure spray to clean
this appliance. Ensure appliance is switched o
& plugs are disconnected before cleaning.
Disconnect unit from mains and wait until appliance has cooled.
Wipe clean using hot, soapy water and soft, non-abrasive cloth.
Wipe dry using a clean cloth. Do not use scouring pads or
abrasive cleaners of any type. Special care should be taken
around electrical parts. Excessive use of water should be avoided.
1.
2.
3.
3: Cleaning
On ‘Chillogen’ models: The compressor
coil must be cleaned regularly, using a
suitable brush and vacuum cleaner.
To Next Page
Loading...
