User Manual v1.5
Page 20 of 64
port number should be 9100 as RAW
press OK to continue
At this point, this is why you will need to have your printer driver (same as you have when you installed it on your
pc)
Select Have Disk, locate and it will install the printer.
You printer will show up, go Next to continue
Select "Use the driver that is currently installed (recommended)" then go next
Enter the printer name you want to called (suggested you put Network at the end so you do not confuse the one
that you currently may have installed. At this point, everything should be installed and your printer should work.
To Next Page
Loading...
Need help?
General
