User Manual v1.0
Page 14 of 59
Connecting to the Internet VIA 3G/4G/LTE/LTE2
If you have a cable, DSL or Satellite modem that does not need to have a username/password, just connect the
output from the Cable/DSL/Satellite to the WAN port of the router then repower your Cable/DSL/Satellite box and
you should be online.
To Connect to the Internet via the Web User Interface with a 4G//LTE/LTE2 connection, you only need to put the sim card in
and the router should auto detect and it should work. If you need to manually enter the info, do the following:
1. Open your Internet web browser.
2. Type http://192.168.10.1 in the address bar and press enter. This opens the login authentication page.
3. Type your Username and Password. Your default Username is root and the password is: admin
The router should self configure itself to work with your modem
4. Run the wizard on the left and follow the on screen options
If you have a micro or nano sim, you can use the included sim adaptor to make it into a
standard full size sim. Turn the router on the bottom and you will see this picture.
Note the gold portion of the sim card is facing upwards and slot side in first.
Just put your sim over this picture and then move it over and push in side of router.
It will click in if it is inserted the correct way.
To Next Page
Loading...
Need help?
General
