EasyManuals Logo

MOFI NETWORK MOFI4500-4GXELTE-SIM4 V2 User Manual

MOFI NETWORK MOFI4500-4GXELTE-SIM4 V2
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
User Manual v1.0
Page 49 of 59
MOFI RECOVERY
How to recover router from wrong file update or other problem
This MOFI utility will restore your MOFI MOFI4500-4GXELTE-SIM4 router back to
working mode.
It will only work on any operating system like Windows, MAC, Linux
Step 1: Set router is recovery mode
Connect the router to your pc with an Ethernet cable to port 1 at the back of the
router.
Unplug the router and press and hold the reset button on the back of the router.
Plug back in power in router and after 10 seconds, release the reset button.
The Wifi status should be blinking fast and as such, the router is now is recovery
mode.
If it does not blink, try it again.
Step 2: Set your network connection to static ip address: 192.168.1.7
To set your static ip address, you can do this:
Go to control panel --> network connection or network and internet
then network and sharing center
then click on change adaptor settings or network connections
under network connections, right click on local area connections and then select
properties
click on Internet Protocol TCP IP V4 so it turns blue
click on properties and enter the below:
IP: 192.168.1.7
subnet: 255.255.255.0
default gateway: 192.168.1.1
Then go out and save
Step 3: Mofi Recovery Interface
Open your web browser to
http://192.168.1.7
Browse to the file you want to recover to and open and run
Will take approx 4 mins for router to complete.
You will see the power/booting status light go off and flash and then go back solid
Step 4: Set back your network cable to automatic
To set your network card back to automatic, you can do this:
Go to control panel --> network connection or network and internet
then network and sharing center
then click on change adaptor settings or network connections
under network connections, right click on local area connections and then select
properties
click on Internet Protocol TCP IP V4 so it turns blue
click on properties and select “Obtain an IP address automatically”
Also, make sure the DNS is set to “Obtain DNS server address automatically

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MOFI NETWORK MOFI4500-4GXELTE-SIM4 V2 and is the answer not in the manual?

MOFI NETWORK MOFI4500-4GXELTE-SIM4 V2 Specifications

General IconGeneral
BrandMOFI NETWORK
ModelMOFI4500-4GXELTE-SIM4 V2
CategoryWireless Router
LanguageEnglish

Related product manuals