SpectraMax M3, M4, M5, and M5
e
Multi-Mode Microplate Readers
0112-0115 F 9
PathCheck
®
Pathlength Measurement Technology
A SpectraMax Multi-Mode Microplate Reader with PathCheck Pathlength
Measurement Technology allows normalization of variable well volumes
to 1-cm cuvette readings. PathCheck Pathlength Measurement
Technology allows for multichannel pipettor validation and for
experiment comparison from different days.
Automix
Using the Automix feature of the SoftMax Pro Software, the contents of
the wells in a microplate can be mixed automatically by linear shaking
before each read cycle, making it possible to perform kinetic analysis of
solid-phase, enzyme-mediated reactions (mixing is not critical for
liquid-phase reactions).
Temperature Control
Temperature in the microplate chamber is isothermal, both at ambient
and when the incubator is turned on. When the incubator is on, the
temperature may be controlled from 2°C above ambient to 60°C.
Supported Plates
Microplates having 6, 12, 24, 48, 96, and 384 wells can be used in the
SpectraMax Multi-Mode Microplate Readers. Top and bottom reads are
available for fluorescence, time-resolved fluorescence and
luminescence detection. When reading optical density at wavelengths
below 340 nm, special UV-transparent, disposable or quartz
microplates and cuvettes that allow transmission of the far UV spectra
must be used.
One plate carrier adapter is provided with the instrument. The adapter
is required for optimum performance with standard 96-well and 384-
well format microplates for all top-read applications.
To Next Page
Loading...
Need help?
General
