MX123 Connection System User Manual - AS-34566-001 50
Section 5: Service Instructions
J. Completing Assembly of Serviced Product
For steps required to complete the assembly of this product, please refer
to Section 3 of this manual.
I. Terminal Crimping (continued)
Contact Molex for terminal sales drawings. Hand crimp instructions, strip
length recommendations, and crimp height requirements are available in
the Molex Spec. Sheet for Tool #63811-4200.
If the Yazaki 2.80mm receptacle terminal needs to be replaced, a new one
can be hand crimped with the appropriate cable seal using crimp tools #J-
38125-6 and #J-38125-7. These tools can be ordered from SPX Kent-Moore
(1-800-345-2233).
To Next Page
Loading...
