4.3.6.4. Import and Export
In the “Import&export” menu, the below display (figure 28) is shown.
Fig 28
Press the "Import " to enter the USB directory where you can select the program required. Then press
the "Ok" to import.
Press the "export" button to enter the system directory where you can select programs and then "Ok"
to export files to the U disk.
4.3.6.5. Software Upgrade
Fig 29
In the “Upgrade” menu, you are shown the interface seen in figure 29. Insert the USB with the latest
software, and then upgrade the interface software or control software of the instrument.
To Next Page
Loading...