molgen PurePrep 96 - Chapter 5. Trouble Shooting; Troubleshooting

Chapter 5. Trouble Shooting
5.1. Troubleshooting
No.
Symptom
Cause
Further actions
1
No display after turning
the system on
Power not connected
Check power
Switch failure
Replace switch
Fuse failure
Replace fuse (5X20 250V 8A)
Other
Contact with Supplier
2
No UV light
UV light failure
Replace light tube, otherwise
contact with supplier
3
No light
Light failure
Replace light tube, otherwise
contact with supplier
4
Doesn’t stop
automatically after
opening the door
Sensor failure
Contact with supplier
5
Big variance between the
actual and display
temperature
Sensor failure
Contact with supplier
6
No heating in the heating
strip
Sensor failure
Contact with supplier
Heater failure
7
Instrument won’t run
Controller failure
Contact with supplier
Motor failure
8
Abnormal sound during
working
Guide rail installed
incorrect
Contact with supplier
Motor failure
Synchronous belt
abrasion
9
Press button not working
Press button failure
Contact with supplier