Page 14 of 20 BM06101 Molift MOVER 300 English Rev E 24/09/2013
Equipment
Quick release suspensions
Steel suspensions
• 4 point steel, Large, size 560x350 mm,
Part no: 1430002
• 4 point steel, Medium, size 450x300 mm,
Part no: 1430001
• 4 point steel, Small, size 350x240 mm
Part no: 1430009
• 2 points steel, Large, size 560 mm,
Part no: 1430007
• 2 points steel, Medium, size 450 mm,
Part no: 1430006
• 2 points steel, Small, size 350
Part no: 1430008
The suspensions can be used on other Molift lift-
ers with the same quick release. If the suspension
is mounted on a lifter with lower SWL, the lowest
SWL will apply!
Castor with directional lock
- Part no 1320140
The castor can be changed according to descrip-
tion in Technical Manual by authorized personnel.
This castor has no brake, therefore we recom-
mend to change only one of the castors. Push the
red handle down to lock the direction. Release by
pulling the handle up.
Integrated charger
• Part no 1340101
The charger can be mounted on the lifter perma-
nently. Park the lifter and connect to a wall socket
to charge the battery.
Suspension with scale
• Scale with 4 point steel suspension, Large,
Part no: 1431001
• Scale with 4 point steel suspension, Medium,
Part no: 1431002
Read the user manual that comes with the
Scale before use.
Change to suspension with scale with quick re-
lease as you change to any other suspension.
Molift Stretcher
• Molift Stretcher (excl loops), Part. no: 2150103
Standard set of lifting loops, Part no: 2150357
Set of auto strap collector, Part no: 2150356
Set of Safety belt, Part no: 2150355
The Molift stretcher can be used in combina-
tion with all Molift 4-point suspensions on
Molift Partner 205.
• Molift Stretcher MR compatible
Part no: 2150108
Only available with Standard set of lifting
loops, Part no : 2150357
Read the operating manual that comes to-
gether with the stretcher before use.
To Next Page
Loading...
