18
AirStream 10
Station Order
There are three different station order options to choose from which change the way
that your DAB stations are displayed in the Station List:
Alphanumeric - The stations are listed in numerical and then alphabetical order. This
is the default setting.
Ensemble - The stations are listed in frequency order.
Valid - The stations that can be received in your area will be reordered to the top of
the DAB station list and those that you cannot receive will be at the bottom, prefixed
by a’?’.
To change the station order, when in DAB mode:
Press the ‘Menu’ button.1.
Use the ‘Tune/Select Dial’ to scroll to and select ‘Station order’.2.
Use the ‘Tune/Select Dial’ to scroll through the options and press to select your 3.
desired option.
DAB Mode Display
When a station is tuned in or selected from a preset, below is an example of the
display and what the icons mean
This Symbol will always be displayed when the AirStream 10 is
powered. It symbolises that the product is connected to the mains
voltage supply.
This Symbol indicates the signal strength. Obviously, the more bars
that are visible, the stronger the signal. There are a maximum of 5
bars visible.
These back to back speakers indicate a stereo signal. If the signal
strength is strong enough, this symbol will be shown and means that
it is receiving a stereo signal rather than a mono signal.
This indicates the Preset number of the stored station. This will display
either: P1, P2, P3, P4, or not display anything at all depending on
stored preset number and if it has actually been stored.
This is the time and will be constantly displayed on your AirStream
10.
1
2
3
4
DAB
Radio 1
Today’s Date:
DD/MM/YYYY
12:00
P3
P3
12:00
To Next Page
Loading...
Need help?
General
Weight and Dimensions