23
monitoraudio.co.uk
Auto Update
you Can set your AirStream 10 to automatically update the time and date when you
are tuned to a DAB (not US version), FM radio station or network that provides this
service. You can select to turn the auto update feature off. To manually set, go to
page 22
Set Format
You can change the clock display to be 12 or 24 hour. 24 hour is the default setting.
Set the Time Zone
Use this feature to select the time zone in which you live. Use Tune/ Select Dial’ to
highlight and select your current timezone.
Daylight Savings
LANGUAGE
LCD STANDBY-BACKLIGHT
The benefit of this section is so that when the unit is in standby mode (just the clock
showing on the display), you can select what state you would like the backlight on.
You can select between Always On, Always Dim and Off.
Always On - In this state, the backlight is the same brightness/ intensity as when the
unit is operating.
Always Dim - When this is selected, the brightness of the display is half of the
‘Always On’ state.
Always Off - The backlight is permanently off. The time and date can still be seen,
but not easily.
FACTORY RESET
Date/Time
12/24 Hour Format
2412
1
2
3
4
*
Daylight savings
Daylight savings
OFFON
1
2
3
4
*
To Next Page
Loading...
Need help?
General
Weight and Dimensions