19
monitoraudio.co.uk
FM RADIO
FM Radio Mode
When your AirStream 10 is in FM mode it can receive Radio Data System or ‘RDS’
information if this is being transmitted by the broadcaster. RDS information will often
include the station name, detail about the programme and the current time.
Selecting ‘FM’ mode
Always make sure that the aerial is fully extended and adjusted (a vertical position
is recommended), to ensure the maximum signal strength and the best possible
sound quality when scanning or listening to FM stations.
Press the ‘Mode’ button and scroll through the modes until you reach “FM Radio”.
The first time you select FM mode on your AirStream 10 it will display the default
87.5MHz.
If you were listening to an FM station when you switched the AirStream 10 off then
this station will be automatically selected when you switch the AirStream 10 back
on.
Tuning to a FM Station
There are a couple of ways of tuning into FM Radio stations. You can press the
‘Tune/Select Dial’ and it will automatically scan through the stations until it finds a
strong enough signal then stop and play that station. Alternatively, you can manually
scan for stations, by pressing the left or right arrow buttons.
Changing the Scan Setting
If the station you are looking for isn’t showing up in the auto scan try changing the
“Scan Setting”. There are 2 options:
Strong Stations - The scan will only stop when a strong signal strength is received
which should also result in a better audio quality. It is possible that the station you
are scanning for may be missed using this option.
All Stations - The scan will stop for every station it receives, even if the signal
strength is poor. Select “No” in the station scan menu option for this scan setting.
To change the setting:
Press the ‘Menu’ button and use the ‘Tune/Select Dial’ to scroll to and select 1.
‘Scan Setting’. You will be asked if you want to search for strong stations
only:
Us the ‘Tune/Select Dial’ to highlight and select a scan option. Select ‘Yes’ for 2.
strong stations only, or ‘No’ to search for all stations
The next time you press ‘Tune/Select Dial’ to scan for a station, from the FM 3.
playing screen your chosen scan option will be used.
FM
radio
FM
1
2
3
4
1
2
3
4
FM
87.5MHz
Today’s Date:
DD/MM/YYYY
FM Station Scan
Strong stations only?
YES
NO
1
2
3
4
*
To Next Page
Loading...
Need help?
General
Weight and Dimensions