Monitor Audio Bronze BR1 User Manual

10
Rev3. © Monitor Audio 2006
Your Bronze BR-FX
The BR-FX surround speaker combines amazing performance with modern,
discreet design that can be flush mounted on a wall using the enclosed wall
brackets. The attractive curved grille and end caps conceal a rigid angular
cabinet construction and Monitor Audio’s renowned and highly acclaimed
MMP
®
Mk2 driver technology and C-CAM
®
tweeters.
By using low slope linear phase crossover design, Monitor Audio has
engineered the Bronze BR-FX to have seamless integration and almost perfect
180-degree dispersion characteristics. Whilst the bass driver always operates
in phase, the tweeter section can be configured to operate as a bi-pole or di-
pole. This is adjusted by way of a toggle switch (see page 11). To enable the
correct functionof these speakers, theyare left and right handedspecific.
Frequency
Response
Sensitivity
(1W@1m)
Nominal Impedance
(Ohms)
Power
Handling
RMS (W)
Recommended
AmplifierPower
Output.
65 Hz - 30 KHz 88 dB 6 80 25-80W
Drive Unit
Complement
Cabinet
Design
Product External
Dimensions
cm (inch)
Weight
(packed)
Kg (lb)
Finishes
1x 5.5” MMP
®
Mk2
bass/midrange driver,
2x 25mm Gold dome
C-CAM
®
tweeters.
Sealed
Cabinet
29.5H x 29W x 13D
(11
5
/
8
x 11
7
/
16
x 5
1
/
8
)
8(17.6)
Black Oak,
Walnut, Cherry,

Monitor Audio Bronze BR1 Specifications

General

Brand	Monitor Audio
Model	Bronze BR1
Category	Speakers
Language	English