MONSTER VISION VR - Specifications and Safety; VR Camera Specifications; Important Safety Warnings; Resetting the Camera

23
Specifications
Image sensors
2x 4.0MP (CMOS)
Functional modes
video, photo
Lens
F2.0 f=1.1mm
Video resolution
1920x960 (30fps)
Picture resolution
3008x1504
File format
Video: H.264 (MOV)
Image: JPG
Memory
microSD card
no internal memory
32GB maximum capacity
USB interface
High-speed USB 2.0
Power supply
Built-in lithium ion battery
1500mAh, 3.8v, 5.7Wh
Camera Dimensions (mm/g)
(in/oz.)
60.0 w x 50.0 h x 50.0 d, 106g
2.36 w x 1.96 h x 1.96 d, 3.7oz
Warning
 The camera battery is built-in. It is not removable.
Do not light the camera on fire or it could explode.
 The camera may get hot when operating for along period
of time or when exposed to direct sunlight. This is normal,
however the operating temperature maximum is 40C, 113F.
 If video recording while the camera is charging, the
temperature may exceed the operating maximum.
 In temperatures lower than 0℃ (32F) the camera may not
turn on or operate properly.
 Do not use the camera in extreme humidity.
 Do not put the camera directly into water.
Use the water case sold separately.
 Protect the lenses to prevent scratching or damage.
RESET: If the camera stops working or fails to respond, use a
push-pin to press the RESET button. It can be a tight fit.