Monster 659 - Pedal Position Adjustment

57
E
Rear brake pedal (fig. 45)
Push down on the pedal (1) to apply the rear brake.
The system is hydraulically operated.
Gear change pedal (fig. 46)
The gearchange pedal has a central position N, with
automatic return, and two directions of movement:
down = press down the pedal to engage the 1
st
gear and to
shift down. At this point the N warning light on the
instrument panel will go out;
upwards= lift the pedal to engage 2
nd
gear and then 3
rd
, 4
th
,
5
th
and 6
th
gears.
Each time you move the pedal you engage the next gear up,
one gear at a time.
1
fig. 45
1
2
3
4
5
6
N
fig. 46