Monster 659 - Drive Chain Tensioning

97
E
Insert the right (6) and left tank retaining screws (4), with
nylon washers (7), and (5).
Tighten the screws (1) and (2) to a torque of 2 Nm ±10%,
starting from the screws (2) around the cap.
Tighten the screws (4) and (5) to a torque of 2 Nm ±10%.
Refit the seat (page 61).
5
4 67
fig. 102
3
1
1
2
fig. 103