CONTROLS AND CONNECTIONS | 13
Rear Ports on the Soundbar
HDMI (ARC)
To use the ARC function, make sure the soundbar's
TO TV (ARC) socket is connected via HDMI cable
(not included) to the HDMI (ARC) socket of your
ARC compliant TV. Then just use your TV remote
control to adjust the volume output (VOL +/– and
MUTE) of the connected audio device. In the TV
settings menu, turn on the ARC and CEC function
(when CEC is turned on, the sound bar will turn on/
off automatically when the TV is turned on/off).
When you use ARC or Optical
connection to your TV or DVD, the audio
output in the TV or DVD settings menu
must be set to PCM mode (instead of
Auto mode, RAW mode or etc.).
To Next Page
Loading...
