EasyManua.ls Logo

Moog Little Phatty - Output Section

Moog Little Phatty
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 18
LP User’s Manual - The Components
Page 19
LP User’s Manual - The Components
E – The Output Section
The Little Phatty has a single monophonic audio output. The level of the audio output
is adjusted by the Volume Control. An On/Off switch allows you to turn off the output
signal while keeping the Headphone signal active.
Section Controls:
Volume:
VOLUME is the main volume control. Rotating the control fully clockwise produces the maximum output.
Rotating the control fully counterclockwise silences the Little Phatty. The VOLUME control setting is not
stored with the preset.
Output On/Off:
The OUTPUT ON/OFF switch controls the audio that appears at the audio output jack. This switch has no
effect on the Headphone jack. This arrangement allows you to monitor and adjust the sound of the LP using
headphones, while silencing the signal at the Output jack. The output is ON when the switch is lit.
Headphone Jack:
The HEADPHONE jack is a 1/4” headphone output for use with standard headphones. The Volume control
adjusts the level at this jack.
Additional CV control:
The VOLUME jack on the side panel is a CV input for external control of the Output level. The jack ac-
cepts a positive control voltage from 0 to 5 Volts, or an expression pedal like the Moog EP-1. A voltage of 0
silences the LP, and a voltage of 5 volts corresponds to the output level set by the Volume control.

Related product manuals