Moog Mother-32 - Setup and Connections; Power; Audio Out

6
MOTHER-32 FIRMWARE UPDATE V2.0 April 2020
THE SWING INTERVAL (Continued)
The following diagram shows an example where the Step Interval is eighth notes, and the Swing Interval is
eighth note triplets.
Experiment with dierent combinations of Swing Interval divisions and Swing % to advance the sequencer in
new and interesting ways!
HERE ARE THE AVAILABLE SWING INTERVAL VALUES:
1. Two whole notes (dotted, triplet, straight)
2. Whole note (dotted, triplet, straight)
3. Half note (dotted, triplet, straight)
4. Quarter note (dotted, triplet, straight)
5. Eighth note (dotted, triplet, straight)
6. Sixteenth note (dotted, triplet, straight)
7. Thirty-second note (dotted, triplet, straight)
8. Sixty-fourth note (dotted, triplet, straight)
HERE IS HOW TO ACCESS THE SWING INTERVAL VALUES:
DOTTED NOTES
Hold down the (KB) button while turning the GLIDE knob to select
one of the eight dotted note values.
TRIPLET NOTES
Hold down the (STEP) button while turning the GLIDE knob to
select one of the eight triplet note values.
STRAIGHT NOTES
Hold down both the (KB) and (STEP) buttons whole rotating the GLIDE knob to select one of the eight
straight note values.
BEAT
STEP INTERVAL: 1/8
SWING INTERVAL: 1/8 TRIPLET
ON/OFFBEAT IF SWING AMT 66%
SEQUENCER STEPS IF SWING 66%
1
1 2
1 2 3 4 5 6 7 8
3 4 5 6 7 8
2 3 4
BEAT
STEP INTERVAL: 1/8
1
1 2
1 2 3 4 5 6 7 8
3 4 5 6 7 8
2 3 4
SWING INTERVAL: 1/8
ON/OFFBEAT IF SWING AMT 66%
SEQUENCER STEPS IF SWING 66%